Best Brush On
If you aren’t set up with spray equipment, or prefer to brush on the finish, then General Finishes EF Polyacrylic Blend Top Coat is a pretty safe bet. In the November, 1995 issue of Fine Woodworking magazine, author and finishing expert Chris Minick tested fifteen waterborne finishes and named EF Polyacrylic the “best brush-on” , adding that this polyurethane and acrylic blend “applies easily, has excellent leveling properties, good vertical cling and looks great – a pleasant surprise in a brush-on finish.” The General Finishes EF Polyacrylic also faired well in stain, solvent resistance, heat and adhesion tests, and as a bonus, sands easily.

Top Performance in a Spray/Brush On Finish
If you really want to finish in style, and want a clear finish that both brushes and sprays exceptionally well, you won’t do better than General Finishes High Performance Polyurethane Top Coat. When Chris Minick came back with his encore waterborne finish test in the November, 2006 issue of Fine Woodworking, he named GF High Performance the “best overall” waterborne finish: “This finish was a dream to work with: it brushed and sprayed easily, it dried flat, it had great protection…” These observations have been borne  customer reviews, like the one left by Steve in Louisburg, who called it, “the best water based top coat I’ve ever used.”

Built-In Amber Tint in an Easy Wipe On Finish
For easy application, a durable finish, and the familiar amber cast of an oil-based finish, Rockler’s WunderCote is uniquely qualified. As far as application and performance are concerned, WunderCote is accurately summed up in this Rockler customer review: “I have tried numerous clear finishes, but none as easy and quick to use as WunderCote. Dries very quickly, has a very, very slight amber color which looks very good. The only drawback over an oil based polyurethane is that WunderCote requires at least five or six coats to give you a good gloss finish. But since the drying time is so fast, it’s not really a problem…  All in all, a great product!”

Are Waterbornes the Only Finish to Use?

Waterborne wood finishes are a safe, environmentally friendly option for most finishing projects, and offer a number of advantages - they’re easy to use, dry super fast, clean-up with water and (most) dry almost perfectly clear. Even so, they aren’t likely to replace all other finishes any time soon. Oil-based finishes, shellac, lacquers and other solvent-based finishes have their advantages, as well - and dedicated followings, too. The truth is, at the present there just isn’t one single clear wood finish that does it all, but if the improvement that waterborne finishes have seen in past year continues, that fact may change.

Copyright © 2009 Rockler, Inc

Related posts:

1. 28 L Accuride CH3832 Outdoor/Indoor Weather-Resistant Slides These are the perfect slides for garages, greenhouses, locker rooms...
2. 24 L Accuride CH3832 Outdoor/Indoor Weather-Resistant Slides These are the perfect slides for garages, greenhouses, locker rooms...
3. 22 L Accuride CH3832 Outdoor/Indoor Weather-Resistant Slides These are the perfect slides for garages, greenhouses, locker rooms...

The second misconception holds that waterborne finishes all have a hazy, bluish appearance when dry, and therefore aren’t a good choice for darker colored woods. Here again, it really depends on the finish. In reality, most waterborne finishes dry almost perfectly clear. What’s missing, for most woodworkers, is the amber tint that they’re used to getting from all oil-based “clear” finishes. In other words, most people have come to associate the rich, amber color that most oil finishes add to the natural color of wood with the “correct” result.

Looked at another way, waterborne finishes actually have an advantage over traditional oil-based finishes: They give you more control over the final appearance of your projects. In some situations – when you want to maintain the color of light colored woods, for example - the best appearance a finish can provide is none at all. In other words, the finish should be perfectly clear, and a waterborne will get you closer than anything else. In other situations, where the familiar amber color of an oil finish is a benefit, you have a couple of options: Most waterborne finishes can be tinted to the desired color. Better still, you can use Rockler’s WunderCote. WunderCote is an easy to apply wipe on waterborne finish that comes pre-tinted to emulate the color of a light amber oil-based finish.

No related posts.

But what really matters is how well a finish stands up to daily life, and that varies widely, depending on the quality of the finish and conditions it is required to face. Generally, any waterborne finish will fair well in light household use. Most have fairly good scratch resistance, and once cured, are (for practical purposes) impervious to water. But that doesn’t hold true for exposure to solvents and heat. Certain solvents can loosen the bond between the resin droplets and damage the finish or cause it to become sticky. Heat can also loosen up and damage a waterborne finish. In tests, not all waterborne finishes stand up equally well to these extremes, and the difference from one brand to the next can be considerable.

Related posts:

1. Titebond II Dark Wood Glue Pint Titebond II Dark Wood glue for dark woods. The cabinetmaker”s...
2. Titebond II Dark Wood Glue 8 Ounce Titebond II Dark Wood glue for dark woods. The cabinetmaker”s...
3. Titebond Original Glue Quart The cabinetmaker”s standard. A ready-to-use aliphatic resin adhesive with outstanding...

Waterborne Finish Basics

Finishes that clean up with water are often referred to as “water-based”, which is a little misleading. From a technical standpoint, “waterborne” is a much more fitting term. In fact, the term “water-based” itself has been a hindrance to the reputation of many finishing products over the years. And understandably so: If a finish were truly water-based it would wash off with a wet rag no matter how long you let it dry, and wouldn’t be much good for anything. But in reality, water plays only a supporting role in the process that turns waterborne finish from a liquid into a durable protective film.

Understanding how a finish that cleans up in water can can adequately protect a wood surface is easier when you know a little about how the chemical process works. A waterborne finish is composed of minute spheres of resin (most commonly acrylic and polyurethane) suspended in water along with a slow evaporating solvent, such as glycol ether. When you spread a waterborne finish out in the open air, the water begins to evaporate. The solvent, which evaporates slower, stays behind and softens the protective coating on the tiny resin latexes, causing them to bond into one continuous film. Since the solvent is the active ingredient the curing process, and not the water, the protective coating that results is not affected by moisture, and often has considerable resistance to a variety of other substances.

Article – Copyright ©2009, Rockler Companies, Inc.

Related posts:

1. Gorilla Wood Glue 8 fl. oz. This all-purpose wood glue combines a natural drying color with...
2. Titebond II Fluorescent Wood Glue, 16 oz. Features the water-resistance of Titebond II, plus a fluorescent additive...